Anycubic Wash & Cure Max is a post-processing solution for your 3D-printed resin models. The machine was created for a large volume, large parts. Can hold up to 14.9L, surpassing the sizes of most wash and cure machines in the market.  The impressive maximum cleaning size of 300 x 165 x 300mm, is compatible with most consumer-grade resin 3D printers (measuring 13.6"- 35cm) and below available on the market.

• all-in-one - dual purpose, wash, and cure in one device
• really larger size - compared to Wash & Cure V2, or Plus, now you can cure and wash larger parts. The cleaning size is 300mm x 165mm x 300mm. Supports large 3D Models with build plate that the size is up to 12 inches (weight not exceeding 2.2kg).
• powerful with cleaning - the adoption of two brand-new modes of spray rinsing and detail dipping ensures efficient and thorough cleaning. Powerful mechanical injection eliminates residual resin on the 3D print surface, while the bottom dipping rinse effectively removes resin from intricate details. 
• alcohol-efficient - 4L of isopropyl alcohol is enough to clean large-sized models, saving over 50% of the alcohol. Moreover, one bucket of isopropyl alcohol can clean up to 20 small models (5L), minimizing alcohol loss during a single wash.
• one-click washing and curing  - complete washing and curing a dual-function button. 
• 360° dimensional curing - automatic rotating curing platform, the machine provides higher curing energy values and longer irradiation distance, enabling comprehensive efficient curing for your models. 
• esthetic and ergonomic - elegant pearl white machine complemented by a sleek gray-toned cover, exuding a fresh and minimalist aesthetic. The user-friendly control panel interface ensures a smooth and seamless operation experience.
• comprehensive protection with fault detection - intelligent fault detection and alerting to inform users when doors are not properly closed, or when water has entered the unit or outlets have become blocked during operation. 

Technical Specification

• Machine Properties: Wash and Cure
• Operation Panel:  Touch panel 249mm x 68mm
• Interface: 24V/6A
• UV lights: 405nm
• Machine Size: 434mm x 556mm x 434 mm
• Cleaning Size: 300mm x 300mm x 165mm
• Weight: 13.5KG

Inside the Box

• 1* Anycubic Wash & Cure Max
• 1* Tray
• 1* Detergent container
• 1* Bucket
• 1* Water container
• 4* Tube
• 1* Hey Key Set
• 1* Plastic Scraper
• 1* Filter replacement for container
• 1* User Manual
• 1* Power cord, power adaptor

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us