Flashforge Guider 3 Plus is a professional-grade 3D printer, featuring high-speed printing, high-model quality output, and quiet and smooth operation. Equipped with a full range of multi-platform intelligent management systems for small businesses, studios, universities, and laboratories, Guider 3 Plus empowers R&D and designs. 

• high speed and low noise - the CoreXY structure allows high-speed printing at 250mm/s and operating environment noise below 50dB
• high-quality output - the dual Z-axis ball screw design ensures accurate positioning when printing each layer of the model,  smooth model surface, and better printing quality.
• large build volume - 350mm x 350mm x 600mm ultra-large build volume.
• stable performance - with the 16mm-diameter Z-axis guide and 16mm TBI ball screws on both sides, the platform can support a maximum load-bearing capacity of 30KG, ensuring the stability of printing large models.
• HEPA 13 air filtration system - can effectively filter the dust odor and particles generated during the printing process.
• sealed filament chamber - containing silica gel desiccant inside, the dual sealed filament chambers on the back will effectively ensure that filaments are in a sealed and dry environment both during the printing process and in the idle state. Worry-free storage, free use, and printing quality are guaranteed. 
• wide range of materials -  PLA/ ABS/ ASA/ PC/ PA/ PETG/ PLA_CF/ PETG-CF/ PETG-GF/ PA-CF/ PA-GF
• open material system - compatible with Third-party Filaments.
• ideal for prototyping - jigs, fixtures, and parts of the assembly line, great for education medical models and architecture prints.

Technical Specification

• Printing Technology: FFF
• Print Resolution: 0.15 mm
• Printer Size: 636*591*1060mm
• Build Volume: 350*350*600mm
• Print Speed: 10-250 mm/s
• Number of Extruders: 1
• Diameter of Extruder: 0.4mm
• Max Set Temp. of Extruder: 320°C
• Max Set Temp. of Platform: 120°C
• Support Filament: PLA/ ABS/ ASA/ PC/ PA/ PETG/ PLA_CF/ PETG-CF/ PETG-GF/ PA-CF/ PA-GF
• Touch Screen: 7’’ 
• Slicing Software: Slic3r/ Skeinforge/ Cura
• Printing Connection: USB cable/ U Disk/ Ethernet/ Wi-Fi
• Input File: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG files
• Output File: GX/ G/ Gcode
• Working Environment: 15-30°C

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us